Tuesday, June 22, 2021
| Time | Event | (+) |
| 07:55 - 08:05 | Welcome and introduction - Dr. Kévin Berger - Organizing Committee Chair of HTS 2020 | |
| 08:05 - 09:30 | Modelling Fundamentals - OS-M1-AM (OS-M1-AM) - Francesco Grilli (Karlsruhe Institute of Technology) | (+) |
| 08:05 - 08:25 | › Electromagnetic coupling between filaments in multifilament coated conductors with finite transverse conductance - Comparison between numerical analyses and experiments in various systems - - Naoyuki Amemiya - Faculty of Science [Kyoto] | |
| 08:25 - 08:45 | › Comparison of screening current simulation modellings of REBCO pancake coils - So Noguchi, Hokkaido University | |
| 08:45 - 09:05 | › Mitigation of shielding-current-induced field of a dipole magnet wound with coated conductors during pattern-operation and evaluation of beam orbit - Yusuke Sogabe, Kyoto University | |
| 09:05 - 09:25 | › Mean-field approximation for a model HTSC cuprate - Alexander Moskvin, Ural Federal University | |
| 09:30 - 10:00 | 30 min Break (B1-AM) | |
| 10:00 - 11:30 | Applications - OS-A1-AM (OS-A1-AM) - Anabela Gonçalves Pronto (NOVA School of Science and Technology) | (+) |
| 10:00 - 10:20 | › Modelling AC losses in a high-temperature bulk superconducting axial-flux synchronous machine - Fernando Mendez, University of Cambridge | |
| 10:20 - 10:40 | › Design of a superconducting magnetic shield closed on both ends for a high-sensitivity particle detector - Philippe Vanderbemden, Department of Electrical Engineering and Computer Science | |
| 10:45 - 11:05 | › Design tools and optimization for DC HTS cables for the future railway network in France - Ghazi Hajiri, Group of Research in Electrical Engineering of Nancy (GREEN) | |
| 11:05 - 11:25 | › Superconducting and hybrid magnetic shields: comparison between 3D modeling and experiment - Laura Gozzelino - Politecnico di Torino [Torino] | |
| 11:30 - 12:30 | Poster presentation - PS1-AM (PS1-AM) - Loïc Quéval (Université Paris-Saclay), Serap Safran (Ankara University) and Guang-Tong Ma (Southwest Jiaotong University) | (+) |
| 11:30 - 12:30 | › AC Loss Simulation in HTS Armature Windings of A 100 kW All-HTS Motor - Shuangrong You, Robinson Research Institute, Victoria University of Wellington | |
| 11:30 - 12:30 | › Analysis of contact behavior in CORC® cabling and under axial tension - Keyang Wang, University of Twente [Netherlands], Lanzhou University | |
| 11:30 - 12:30 | › Contribution to the modeling of eddy current losses in HTS tapes - Hocine Menana, Group of Research in Electrical Engineering of Nancy (GREEN) | |
| 11:30 - 12:30 | › Dynamic modelling of the high temperature superconducting maglev system using different E-J relationships - Jun Zheng, State Key Laboratory of Traction Power, Southwest Jiaotong University | |
| 11:30 - 12:30 | › Modeling HTS dynamo-type flux pumps: open-circuit mode and charge of an HTS coil - Asef Ghabeli, Institute of Electrical Engineering, Slovak Academy of Sciences | |
| 11:30 - 12:30 | › Modelling and simulation of resistive type superconducting fault current limiter using OpenModelica. - Abderrahmane Djaouti, Groupe de Recherche en Energie Electrique de Nancy (GREEN) | |
| 11:30 - 12:30 | › Modelling Interactions Between HTS Tapes and Permanent Magnet Fields in an HTS Dynamo - Ross Taylor, Robinson Research Institute, Victoria University of Wellington | |
| 11:30 - 12:30 | › Modelling Pulsed Field Magnetization of Ring-Shaped Bulk Superconductors - Mike Beck, Cambridge University Engineering Department | |
| 12:30 - 13:30 | 60 min Lunch (L1) | |
| 13:30 - 14:20 | Lecture #1: LiFE-HTS: Liège university Finite Element models for High-Temperature Superconductors (K1) - Prof. Christophe Geuzaine |
|
| 14:20 - 15:40 | Coupled & Uncoupled Multiphysics Modelling - OS-C1-PM (OS-C1-PM) - Wescley Tiago Batista de Sousa (Karlsruhe Institute of Technology) | (+) |
| 14:20 - 14:40 | › Field-Circuit Coupled Simulation of Magnetothermal Dynamics in an HTS Solenoid - Lorenzo Bortot - Technische Universität Darmstadt, European Organization for Nuclear Research | |
| 14:40 - 15:00 | › Modelling of the pulsed field magnetization of a (RE)BaCuO bulk with a superconducting weld - Rémi Dorget - Safran Tech, Group of Research in Electrical Engineering of Nancy (GREEN) | |
| 15:00 - 15:20 | › Thermal-hydraulic models for HTS power-transmission cables: status and needs - Laura Savoldi - Politecnico di Torino [Torino] | |
| 15:20 - 15:40 | › A novel method to simulate coupled 3D FEM with circuit applied to SIC-SFCL - Gabriel dos Santos - Departamento de Engenharia de Telecomunicações [Niterói-Rio de Janeiro] | |
| 15:40 - 16:10 | 30 min Break (B1-PM) | |
| 16:10 - 17:30 | Modelling Fundamentals - OS-M2-PM (OS-M2-PM) - Antonio Morandi (University of Bologna) | (+) |
| 16:10 - 16:30 | › 3D Stack Magnetization Problems: Solution by the Fast Fourier Transform-Based Method - Leonid Prigozhin - Ben-Gurion University of the Negev | |
| 16:30 - 16:50 | › Modeling of the non-uniform Jc distribution along the c-axis of seeded melt growth (RE)BCO bulks - Loïc Quéval - Laboratoire Génie électrique et électronique de Paris | |
| 16:50 - 17:10 | › h-phi Finite-Element Formulation for Modelling Thin Superconducting Layers - Bruno Alves, Polytechnique Montréal | |
| 17:10 - 17:30 | › H-phi formulation for the efficient simulation of superconductors - Alexandre Arsenault, Polytechnique Montréal | |
| 17:30 - 18:30 | Poster presentation - PS2-PM (PS2-PM) - João Murta Pina (NOVA School of Science and Technology), Leonid Prigozhin (Ben Gurion University of the Negev) and Benoît Vanderheyden (University of Liege) | (+) |
| 17:30 - 18:30 | › Advantage of local p-adaptivity in FEM simulation of normal zone propagation in a Rebco tape - Alexandre Halbach, Tampere University | |
| 17:30 - 18:30 | › DC modeling and characterization of HTS coils with non uniform current density distribution - Sara Fawaz, University of Lorraine | |
| 17:30 - 18:30 | › Flexibility and contact resistance of CORC cables and wires: Experiments and modeling - Anvar Valiyaparambil Abdulsalam, Institute for Superconducting and Electronic Materials, University of Wollongong, University of Twente [Netherlands] | |
| 17:30 - 18:30 | › HTS Coated conductor losses model using the coupling method and the T-A formulation - Flávio Martins, Departamento de Engenharia de Telecomunicações [Niterói-Rio de Janeiro] | |
| 17:30 - 18:30 | › Impact of strain-dependent Jc on SCIF in 2G HTS magnets - Frederic Trillaud, Instituto de Ingeniería | |
| 17:30 - 18:30 | › Microstructural parameters for modelling of superconducting foams - Michael Koblischka, Experimental Physics, Saarland University | |
| 17:30 - 18:30 | › Modeling of high-temperature superconducting pancake coils using the axisymmetric partial element equivalent circuit method - Rafael Medeiros, Laboratoire des Matériels Électriques, Laboratoire Génie électrique et électronique de Paris | |
| 17:30 - 18:30 | › Numerical Simulations of Superconductor Stability against Quench - Harald Reiss, University of Wuerzburg | |
| 17:30 - 18:30 | › Superconductive and hybrid shielding design: a 3D-modeling study - Michela Fracasso, Politecnico di Torino, Dept. of Applied Science and Technology and INFN Sez. Torino | |
| 18:30 - 19:30 | Applications - OS-A2-PM (OS-A2-PM) - Mark Ainslie (University of Cambridge) | (+) |
| 18:30 - 18:50 | › Modelling the record trapped field by pulsed field magnetisation of a composite bulk MgB2 superconducting ring - Vito Cientanni, Cambridge University Engineering Department | |
| 18:50 - 19:10 | › 3D modeling of HTS ring shape magnets - Liao Hengpei, University of Strathclyde | |
| 19:10 - 19:30 | › Modelling of Two Topologies of Trapped-flux Machines with Second Generation Tapes Using T-A 3D Formulation - Bárbara Santos, Federal University of Rio de Janeiro (UFRJ) |
Wednesday, June 23, 2021
| Time | Event | (+) |
| 08:00 - 09:00 | Coupled & Uncoupled Multiphysics Modelling - OS-C2-AM (OS-C2-AM) - Enric Pardo (Slovak Academy of Sciences) | (+) |
| 08:00 - 08:20 | › Modelling of various rectifier flux pump topologies enabled by JcB switches - Sriharsha Venuturumilli, Robinson Research Institute, Victoria University of Wellington | |
| 08:20 - 08:40 | › Mechanical behavior of HTS coils in high field magnets based on the electromechanical coupling - Huadong Yong, Key Laboratory of Mechanics on Disaster and Environment in Western China, Ministry of Education of China, Lanzhou University, Lanzhou, Gansu 730000, PR China | |
| 08:40 - 09:00 | › Coupled multiphysics modelling of the thermal-magnetic-mechanical instability in bulk superconductors during magnetization - ze Jing, School of Mechano-Electronic Engineering, Xidian University, Department of Engineering, University of Cambridge | |
| 09:00 - 10:00 | Applications - OS-A3-AM (OS-A3-AM) - Hocine Menana (University of Lorraine) | (+) |
| 09:00 - 09:20 | › Utilising full angle-dependent critical current data in the electromagnetic modelling of HTS coils - Stuart Wimbush, Robinson Research Institute, Victoria University of Wellington | |
| 09:25 - 09:45 | › AC loss modeling of the stator of a 1 MW REBCO superconducting motor for aviation - Enric Pardo - Institute of Electrical Engineering, Slovak Academy of Sciences | |
| 10:00 - 10:30 | 30 min Break (B2-AM) | |
| 10:30 - 12:00 | Modelling Fundamentals - OS-M3-AM (OS-M3-AM) - Min Zhang (University of Strathclyde) | (+) |
| 10:30 - 10:50 | › Stability of H-A and T-A Finite Element Formulations - Julien Dular, University of Liège | |
| 10:50 - 11:10 | › A New Benchmark Numerical Model: The High-Tc Superconducting Dynamo - Mark Ainslie, Department of Engineering, University of Cambridge | |
| 11:15 - 11:35 | › A volume integral equation based equivalent circuit for 3D calculation of the levitation force - Antonio Morandi - Dept. Of Electrical, Electronic And Information Engineering, University Of Bologna | |
| 11:35 - 11:55 | › 3D Homogenized T-A Formulation for Modeling HTS Coils - Carlos Vargas-Llanos - Karlsruhe Institute of Technology | |
| 12:00 - 13:00 | Poster presentation - PS3-AM (PS3-AM) - Philippe Vanderbemden (University of Liege), Bruno Douine (Université de Lorraine), Michael Koblischka (Saarland University) and Guilaume Dilasser (CEA Saclay) | (+) |
| 12:00 - 13:00 | › AC Loss Calculation of Synchronous Generators Made of HTS Superconducting Armature Windings and Permanent Magnet Rotor - Inanir Fedai, Yildiz Technical University | |
| 12:00 - 13:00 | › Modeling and experimental research of machine with annular HTS winding - Nikolay Ivanov, Moscow aviation institute | |
| 12:00 - 13:00 | › Modeling Quasiparticles and Pseudogap in Cuprates in Presence of Charge Ordering Potential - Anna E. Myasnikova, Southern Federal University [Rostov-on-Don] | |
| 12:00 - 13:00 | › Models for optimization and AC Losses Analysis in a 2G HTS Cable - Vasily Zubko, VNIIKP | |
| 12:00 - 13:00 | › Monte Carlo simulations of a model cuprate - Yury Panov, Ural Federal University [Ekaterinburg] | |
| 12:00 - 13:00 | › Monte Carlo simulations of vortex dynamics in high-temperature superconductors under pulsed-field magnetization - Anna Moroz, The National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) [Moscow, Russia] | |
| 12:00 - 13:00 | › Numerical modelling of a type II superconducting disk electromagnetic launching using a pancake coil - Vilius Vertelis, Institut franco-allemand de recherches de Saint-Louis, Center for Physical Sciences and technlogy | |
| 12:00 - 13:00 | › Reduction in energy dissipation rate with increased effective applied field and variation in energy stored and dissipated with relative phase of two sinusoidal components of the fi - Zdenek Janu, Institute of Physics of the CAS | |
| 12:00 - 13:00 | › The resonance properties of Superconductor/Ferroelectric/Superconductor heterostructure - Ilhom Rahmonov, Umarov physical and Technical institute, Joint Institute for Nuclear Research | |
| 13:00 - 14:00 | 60 min Lunch (L2) | |
| 14:00 - 15:00 | Lecture #2: An overview of Safran contribution to a decarbonized aviation (K2) - Dr. Thierry Lebey |
|
| 15:00 - 16:30 | Modelling Fundamentals - OS-M4-PM (OS-M4-PM) - Mark Ainslie (University of Cambridge) | (+) |
| 15:00 - 15:20 | › The Campbell penetration depth in type-II superconductors - Jan Srpcic, University of Cambridge [UK] | |
| 15:20 - 15:40 | › The Campbell Model as a Tool to Introduce Students to AC Loss Calculation in Superconductors - Francesco Grilli, Institute for Technical Physics, Karlsruhe Institute of Technology, Karlsruhe Institute of Technology | |
| 15:45 - 16:05 | › AURORA: Learning Superconductivity Through Apps - Nicolo Riva, EPFL (Ecole Polytechnique Federale de Lausanne) | |
| 16:05 - 16:25 | › Magnetization simulation of high temperature superconductors using the ANSYS A-V-A formulation: 2D and 3D, critical state model and flux creep model - Kai ZHANG, Paul Scherrer Institute | |
| 16:30 - 17:00 | 30 min Break (B2-PM) | |
| 17:00 - 18:00 | Coupled & Uncoupled Multiphysics Modelling - OS-C3-PM (OS-C3-PM) - Frédéric Sirois (Polytechnique Montréal) | (+) |
| 17:00 - 17:20 | › Numerical modelling of the ferromagnetic-superconductor interaction in 3D geometry using A–formulation. - Mykola Solovyov, Institute of Electrical Engineering, Slovak Academy of Sciences | |
| 17:20 - 17:40 | › 2D and 3D validation of a hybrid method based on A and H formulations for Pulsed Field Magnetization - Jakub Kapek, Group of Research in Electrical Engineering of Nancy (GREEN) | |
| 17:40 - 18:00 | › Axial and transverse load FEM analysis of CORC cables and wires - Anvar Valiyaparambil Abdulsalam, Institute for Superconducting and Electronic Materials, University of Wollongong, University of Twente [Netherlands] | |
| 18:00 - 19:00 | Poster presentation - PS4-PM (PS4-PM) - Wescley Tiago Batista de Sousa (Karlsruhe Institute of Technology), Jean Lévêque (University of Lorraine), Frederic Trillaud (Universidad Nacional Autónoma de Mexico) and Guilherme Gonçalves Sotelo (Fluminense Federal University) | (+) |
| 18:00 - 19:00 | › 2D Numerical Simulations of HTS Cable-in-Conduit Conductor Cables - Gianluca De Marzi, Italian National agency for new technologies, Energy and sustainable economic development [Frascati] | |
| 18:00 - 19:00 | › A new E-field finite element formulation for the numerical modelling of high temperature superconductors - Ruben Otin, UK Atomic Energy Authority | |
| 18:00 - 19:00 | › Design and Testing of a New Cooling System using Solid Nitrogen for Pulsed Field Magnetization and Characterization of HTS Bulks - ghazi hajiri, Group of Research in Electrical Engineering of Nancy (GREEN) | |
| 18:00 - 19:00 | › Fast Modelling Approach for Computing AC Losses in HTS Stacks and Coils Near Ferromagnetic Parts - Yazid Statra, Group of Research in Electrical Engineering of Nancy (GREEN) | |
| 18:00 - 19:00 | › Modeling cryo-magnets - Jean-Guy Caputo, Laboratoire de Mathematiques | |
| 18:00 - 19:00 | › Numerical investigation of critical states in superposed superconducting films - Loïc Burger, Department of Electrical Engineering & Computer Science - Université de Liège | |
| 18:00 - 19:00 | › The application of unsupervised learning to a dataset of AC susceptibility measurements of High-Temperature Superconductors - Marcin Kowalik, University of Information Technology and Management | |
| 19:00 - 19:10 | Closing and announcements - Dr Mark Ainslie - President of the HTS Modelling Workgroup |
