Tentative Programme

Week List

	Tue. 22	Wed. 23	Thu. 24
07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00	Welcome and introduction 7:55 - 8:05 (10min) Welcome and introduction Dr. Kévin Berger Modelling Fundamentals - OS-M1-AM 8:05 - 9:30 (1h25) Modelling Fundamentals - OS-M1-AM OS-M1-AM Francesco Grilli (Karlsruhe Institute of Technology) › Electromagnetic coupling between filaments in multifilament coated conductors with finite transverse conductance - Comparison between numerical analyses and experiments in various systems - - 08:05-08:25 (20min) › Comparison of screening current simulation modellings of REBCO pancake coils - So Noguchi, Hokkaido University 08:25-08:45 (20min) › Mitigation of shielding-current-induced field of a dipole magnet wound with coated conductors during pattern-operation and evaluation of beam orbit - Yusuke Sogabe, Kyoto University 08:45-09:05 (20min) › Mean-field approximation for a model HTSC cuprate - Alexander Moskvin, Ural Federal University - Yuri Panov, Ural Federal University 09:05-09:25 (20min) 30 min Break 9:30 - 10:00 (30min) 30 min Break B1-AM Applications - OS-A1-AM 10:00 - 11:30 (1h30) Applications - OS-A1-AM OS-A1-AM Anabela Gonçalves Pronto (NOVA School of Science and Technology) › Modelling AC losses in a high-temperature bulk superconducting axial-flux synchronous machine - Fernando Mendez, University of Cambridge 10:00-10:20 (20min) › Design of a superconducting magnetic shield closed on both ends for a high-sensitivity particle detector - Philippe Vanderbemden, Department of Electrical Engineering and Computer Science 10:20-10:40 (20min) › Design tools and optimization for DC HTS cables for the future railway network in France - 10:45-11:05 (20min) › Superconducting and hybrid magnetic shields: comparison between 3D modeling and experiment - 11:05-11:25 (20min) Poster presentation - PS1-AM 11:30 - 12:30 (1h) Poster presentation - PS1-AM PS1-AM Loïc Quéval (Université Paris-Saclay), Serap Safran (Ankara University) and Guang-Tong Ma (Southwest Jiaotong University) › A HTS Flux Pump Simulation methodology Based on the Electrical Circuit - Chao Li, University of Cambridge, Tianjin University 11:30-12:30 (1h) › AC Loss Simulation in HTS Armature Windings of A 100 kW All-HTS Motor - Shuangrong You, Robinson Research Institute, Victoria University of Wellington 11:30-12:30 (1h) › Analysis of contact behavior in CORC® cabling and under axial tension - Keyang Wang, University of Twente [Netherlands], Lanzhou University 11:30-12:30 (1h) › Contribution to the modeling of eddy current losses in HTS tapes - Hocine Menana, Group of Research in Electrical Engineering of Nancy (GREEN) - Walid Dirahoui, Group of Research in Electrical Engineering of Nancy (GREEN) - Yazid Statra, Group of Research in Electrical Engineering of Nancy (GREEN) 11:30-12:30 (1h) › Dynamic modelling of the high temperature superconducting maglev system using different E-J relationships - Jun Zheng, State Key Laboratory of Traction Power, Southwest Jiaotong University - Ye Hong, State Key Laboratory of Traction Power, Southwest Jiaotong University 11:30-12:30 (1h) › Modeling HTS dynamo-type flux pumps: open-circuit mode and charge of an HTS coil - Asef Ghabeli, Institute of Electrical Engineering, Slovak Academy of Sciences 11:30-12:30 (1h) › Modelling and simulation of resistive type superconducting fault current limiter using OpenModelica. - Abderrahmane DJAOUTI, Groupe de Recherche en Energie Electrique de Nancy 11:30-12:30 (1h) › Modelling Interactions Between HTS Tapes and Permanent Magnet Fields in an HTS Dynamo - Ross Taylor, Robinson Research Institute, Victoria University of Wellington 11:30-12:30 (1h) › Modelling Pulsed Field Magnetization of Ring-Shaped Bulk Superconductors - Mike Beck, Cambridge University Engineering Department 11:30-12:30 (1h) › Study of Specific Heat in Iron Based Superconductors: A Theoretical Three-Orbital Model Analysis - Madhavi Ahalawat, Indian Institute of Technology 11:30-12:30 (1h) 60 min Lunch 12:30 - 13:30 (1h) 60 min Lunch L1 Lecture #1: LiFE-HTS: Liège university Finite Element models for High-Temperature Superconductors 13:30 - 14:20 (50min) Lecture #1: LiFE-HTS: Liège university Finite Element models for High-Temperature Superconductors K1 Prof. Christophe Geuzaine Coupled & Uncoupled Multiphysics Modelling - OS-C1-PM 14:20 - 15:40 (1h20) Coupled & Uncoupled Multiphysics Modelling - OS-C1-PM OS-C1-PM Wescley Tiago Batista de Sousa (Karlsruhe Institute of Technology) › Field-Circuit Coupled Simulation of Magnetothermal Dynamics in an HTS Solenoid - 14:20-14:40 (20min) › Modelling of the pulsed field magnetization of a (RE)BaCuO bulk with a superconducting weld - 14:40-15:00 (20min) › Thermal-hydraulic models for HTS power-transmission cables: status and needs - 15:00-15:20 (20min) › A novel method to simulate coupled 3D FEM with circuit applied to SIC-SFCL - 15:20-15:40 (20min) 30 min Break 15:40 - 16:10 (30min) 30 min Break B1-PM Modelling Fundamentals - OS-M2-PM 16:10 - 17:30 (1h20) Modelling Fundamentals - OS-M2-PM OS-M2-PM Antonio Morandi (University of Bologna) › ‎3D Stack Magnetization Problems: Solution by the Fast Fourier Transform-Based Method - 16:10-16:30 (20min) › Modeling of the non-uniform Jc distribution along the c-axis of seeded melt growth (RE)BCO bulks - 16:30-16:50 (20min) › h-phi Finite-Element Formulation for Modelling Thin Superconducting Layers - Bruno Alves, Polytechnique Montréal - Frédéric Sirois, Polytechnique Montréal 16:50-17:10 (20min) › H-phi formulation for the efficient simulation of superconductors - Alexandre Arsenault, Polytechnique Montréal 17:10-17:30 (20min) Poster presentation - PS2-PM 17:30 - 18:30 (1h) Poster presentation - PS2-PM PS2-PM João Murta Pina (NOVA School of Science and Technology), Leonid Prigozhin (Ben Gurion University of the Negev) and Benoît Vanderheyden (University of Liege) › A Finite-Difference Based Simulation Model for Thermal Performance of HTS Coated Conductors - Wescley Tiago B. de Sousa, Karlsruhe Institute of Technology 17:30-18:30 (1h) › Advantage of local p-adaptivity in FEM simulation of normal zone propagation in a Rebco tape - Alexandre Halbach, Tampere University 17:30-18:30 (1h) › DC modeling & characterization of HTS coils with non uniform current density distribution - Sara Fawaz, University of Lorraine 17:30-18:30 (1h) › Flexibility and contact resistance of CORC cables and wires: Experiments and modeling - Anvar Valiyaparambil Abdulsalam, Institute for Superconducting and Electronic Materials, University of Wollongong, University of Twente [Netherlands] 17:30-18:30 (1h) › HTS Coated conductor losses model using the coupling method and the T-A formulation - Flávio Martins, Departamento de Engenharia de Telecomunicações [Niterói-Rio de Janeiro] 17:30-18:30 (1h) › Impact of strain-dependent Jc on SCIF in 2G HTS magnets - Frederic Trillaud, Instituto de Ingeniería 17:30-18:30 (1h) › Microstructural parameters for modelling of superconducting foams - Michael Koblischka, Experimental Physics - Quentin Nouailhetas, Group of Research in Electrical Engineering of Nancy (GREEN), Experimental Physics, Saarand University 17:30-18:30 (1h) › Modeling of high-temperature superconducting pancake coils using the axisymmetric partial element equivalent circuit method - Rafael Medeiros, Laboratoire des Matériels Électriques, Laboratoire Génie électrique et électronique de Paris 17:30-18:30 (1h) › Numerical Simulations of Superconductor Stability against Quench - Harald Reiss, University of Wuerzburg 17:30-18:30 (1h) › Superconductive and hybrid shielding design: a 3D-modeling study - Michela Fracasso, Politecnico di Torino, Dept. of Applied Science and Technology and INFN Sez. Torino 17:30-18:30 (1h) › Validation of numerical model of effective critical currents in HTS tape stack - Kiran Uppalapati, Commonwealth Fusion Systems - Syun'ichi Shiraiwa, Massachusetts Institute of Technology 17:30-18:30 (1h) Applications - OS-A2-PM 18:30 - 19:30 (1h) Applications - OS-A2-PM OS-A2-PM Mark Ainslie (University of Cambridge) › Modelling the record trapped field by pulsed field magnetisation of a composite bulk MgB2 superconducting ring - Vito Cientanni, Cambridge University Engineering Department 18:30-18:50 (20min) › 3D modeling of HTS ring shape magnets - Min Zhang, UNIVERSITY OF STRATHCLYDE 18:50-19:10 (20min) › Modelling of Two Topologies of Trapped-flux Machines with Second Generation Tapes Using T-A 3D Formulation - Bárbara Santos, Federal University of Rio de Janeiro (UFRJ) 19:10-19:30 (20min)	Coupled & Uncoupled Multiphysics Modelling - OS-C2-AM 8:00 - 9:00 (1h) Coupled & Uncoupled Multiphysics Modelling - OS-C2-AM OS-C2-AM › Modelling of various rectifier flux pump topologies enabled by JcB switches - Sriharsha Venuturumilli, Robinson Research Institute, Victoria University of Wellington 08:00-08:20 (20min) › Mechanical behavior of HTS coils in high field magnets based on the electromechanical coupling - Huadong Yong, Key Laboratory of Mechanics on Disaster and Environment in Western China, Ministry of Education of China, Lanzhou University, Lanzhou, Gansu 730000, PR China 08:20-08:40 (20min) › Coupled multiphysics modelling of the thermal-magnetic-mechanical instability in bulk superconductors during magnetization - ze Jing, School of Mechano-Electronic Engineering, Xidian University, Department of Engineering, University of Cambridge 08:40-09:00 (20min) Applications - OS-A3-AM 9:00 - 10:00 (1h) Applications - OS-A3-AM OS-A3-AM Hocine Menana (University of Lorraine) › Utilising full angle-dependent critical current data in the electromagnetic modelling of HTS coils - Stuart Wimbush, Robinson Research Institute, Victoria University of Wellington 09:00-09:20 (20min) › Modeling and experimental research of 10 kW fully HTS machine - Konstantin Kovalev, Moscow aviation institute - Nicolay Ivanov, Moscow aviation institute 09:20-09:40 (20min) › AC loss modeling of the stator of a 1 MW REBCO superconducting motor for aviation - Enric Pardo, Institute of Electrical Engineering, Slovak Academy of Sciences 09:40-10:00 (20min) 30 min Break 10:00 - 10:30 (30min) 30 min Break B2-AM Modelling Fundamentals - OS-M3-AM 10:30 - 12:00 (1h30) Modelling Fundamentals - OS-M3-AM OS-M3-AM Min Zhang (University of Strathclyde) › Stability of H-A and T-A Finite Element Formulations - Julien Dular, University of Liège 10:30-10:50 (20min) › A New Benchmark Numerical Model: The High-Tc Superconducting Dynamo - Mark Ainslie, Department of Engineering, University of Cambridge 10:50-11:10 (20min) › A volume integral equation based equivalent circuit for 3D calculation of the levitation force - 11:15-11:35 (20min) › 3D Homogenized T-A Formulation for Modeling HTS Coils - 11:35-11:55 (20min) Poster presentation - PS3-AM 12:00 - 13:00 (1h) Poster presentation - PS3-AM PS3-AM Philippe Vanderbemden (University of Liege), Bruno Douine (Université de Lorraine), Michael Koblischka (Saarland University) and Guilaume Dilasser (CEA Saclay) › AC Loss Calculation of Synchronous Generators Made of HTS Superconducting Armature Windings and Permanent Magnet Rotor - Inanir Fedai, Yildiz Technical University 12:00-13:00 (1h) › Calculation of the trapped magnetic field in HTS using models for current and magnetization - Ekaterina Kurbatova, National Research University, Moscow Power Engineering Institute 12:00-13:00 (1h) › Designing 2G YBCO Coated Whole-Body MRI Electromagnets - Hüsnü Kara, Necmettin Erbakan University-Science Faculty - Yakup Boran, Sakarya University of Applied Sciences-Faculty of Technology 12:00-13:00 (1h) › Influence of Magnetic Moment Dynamics of Nanomagnet on Formation of Longitudinal Plasma Wave in High Temperature Superconductor - Kirill Kulikov, Joint Institute for Nuclear Research 12:00-13:00 (1h) › Modeling and experimental research of machine with annular HTS winding - Nikolay Ivanov, Moscow aviation institute 12:00-13:00 (1h) › Modeling Quasiparticles and Pseudogap in Cuprates in Presence of Charge Ordering Potential - Anna E. Myasnikova, Southern Federal University [Rostov-on-Don] 12:00-13:00 (1h) › Models for optimization and AC Losses Analysis in a 2G HTS Cable - Vasily Zubko, VNIIKP 12:00-13:00 (1h) › Monte Carlo simulations of a model cuprate - Yury Panov, Ural Federal University [Ekaterinburg] - Alexander Moskvin, Ural Federal University [Ekaterinburg] - Vasilii Ulitko, Ural Federal University [Ekaterinburg] 12:00-13:00 (1h) › Monte Carlo simulations of vortex dynamics in high-temperature superconductors under pulsed-field magnetization - Anna Moroz, The National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) [Moscow, Russia] 12:00-13:00 (1h) › Numerical analysis and the experimental study of the levitation characteristics of the various configurations HTS tapes stacks - Igor Rudnev, The National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) [Moscow, Russia] 12:00-13:00 (1h) › Numerical modelling of a type II superconducting disk electromagnetic launching using a pancake coil - Vilius Vertelis, Institut franco-allemand de recherches de Saint-Louis, CENTER FOR PHYSICAL SCIENCES AND TECHNOLOGY 12:00-13:00 (1h) › Reduction in energy dissipation rate with increased effective applied field and variation in energy stored and dissipated with relative phase of two sinusoidal components of the fi - Zdenek Janu, Institute of Physics of the CAS 12:00-13:00 (1h) › The resonance properties of Superconductor/Ferroelectric/Superconductor heterostructure - Ilhom Rahmonov, Umarov physical and Technical institute, Joint Institute for Nuclear Research 12:00-13:00 (1h) 60 min Lunch 13:00 - 14:00 (1h) 60 min Lunch L2 Lecture #2: An overview of Safran contribution to a decarbonized aviation 14:00 - 15:00 (1h) Lecture #2: An overview of Safran contribution to a decarbonized aviation K2 Dr. Thierry Lebey Modelling Fundamentals - OS-M4-PM 15:00 - 16:30 (1h30) Modelling Fundamentals - OS-M4-PM OS-M4-PM Mark Ainslie (University of Cambridge) › The Campbell penetration depth in type-II superconductors - Jan Srpcic, University of Cambridge [UK] 15:00-15:20 (20min) › The Campbell Model as a Tool to Introduce Students to AC Loss Calculation in Superconductors - Francesco Grilli, Institute for Technical Physics, Karlsruhe Institute of Technology, Karlsruhe Institute of Technology 15:20-15:40 (20min) › AURORA: Learning Superconductivity Through Apps - Nicolo Riva, EPFL (Ecole Polytechnique Federale de Lausanne) 15:45-16:05 (20min) › Magnetization simulation of high temperature superconductors using the ANSYS A-V-A formulation: 2D and 3D, critical state model and flux creep model - Kai ZHANG, Paul Scherrer Institute 16:05-16:25 (20min) 30 min Break 16:30 - 17:00 (30min) 30 min Break B2-PM Coupled & Uncoupled Multiphysics Modelling - OS-C3-PM 17:00 - 18:00 (1h) Coupled & Uncoupled Multiphysics Modelling - OS-C3-PM OS-C3-PM Frédéric Sirois (Polytechnique Montréal) › Numerical modelling of the ferromagnetic-superconductor interaction in 3D geometry using A–formulation. - Mykola Solovyov, Institute of Electrical Engineering, Slovak Academy of Sciences 17:00-17:20 (20min) › 2D and 3D validation of a hybrid method based on A and H formulations for Pulsed Field Magnetization - Jakub Kapek, Group of Research in Electrical Engineering of Nancy (GREEN) 17:20-17:40 (20min) › Axial and transverse load FEM analysis of CORC cables and wires - Anvar Valiyaparambil Abdulsalam, Institute for Superconducting and Electronic Materials, University of Wollongong, University of Twente [Netherlands] 17:40-18:00 (20min) Poster presentation - PS4-PM 18:00 - 19:00 (1h) Poster presentation - PS4-PM PS4-PM Wescley Tiago Batista de Sousa (Karlsruhe Institute of Technology), Jean Lévêque (University of Lorraine), Frederic Trillaud (Universidad Nacional Autónoma de Mexico) and Guilherme Gonçalves Sotelo (Fluminense Federal University) › 2D Numerical Simulations of HTS Cable-in-Conduit Conductor Cables - Gianluca De Marzi, Italian National agency for new technologies, Energy and sustainable economic development [Frascati] 18:00-19:00 (1h) › A General Form T-A Formulation - Felix Huber, Department of Electronic and Electrical Engineering [Strathclyde] 18:00-19:00 (1h) › A new E-field finite element formulation for the numerical modelling of high temperature superconductors - Ruben Otin, UK Atomic Energy Authority 18:00-19:00 (1h) › Design and Testing of a New Cooling System using Solid Nitrogen for Pulsed Field Magnetization and Characterization of HTS Bulks - ghazi hajiri, Group of Research in Electrical Engineering of Nancy (GREEN) 18:00-19:00 (1h) › Extending reduced model of twisted multi-filamentary superconductors to configurations with Jc(B,T) and n(B,T) - ABELIN KAMENI NTICHI, Laboratoire Génie électrique et électronique de Paris 18:00-19:00 (1h) › Fast Modelling Approach for Computing AC Losses in HTS Stacks and Coils Near Ferromagnetic Parts - Yazid Statra, Group of Research in Electrical Engineering of Nancy (GREEN) - Hocine Menana, Group of Research in Electrical Engineering of Nancy (GREEN) - Bruno Douine, Group of Research in Electrical Engineering of Nancy (GREEN) 18:00-19:00 (1h) › Modeling cryo-magnets - Jean-Guy Caputo, Laboratoire de Mathematiques 18:00-19:00 (1h) › Numerical investigation of critical states in superposed superconducting films - Loïc Burger, Department of Electrical Engineering & Computer Science - Université de Liège 18:00-19:00 (1h) › Numerical simulation of the magnetic levitation systems of complex geometries using a combined A-T-H formulation - Irina Anischenko, The National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) [Moscow, Russia] 18:00-19:00 (1h) › The application of unsupervised learning to a dataset of AC susceptibility measurements of High-Temperature Superconductors - Marcin Kowalik, University of Information Technology and Management 18:00-19:00 (1h) Closing and announcements 19:00 - 19:10 (10min) Closing and announcements Dr. Kévin Berger	[COST CA19108] Possible Meetings - High-Temperature SuperConductivity for AcceLerating the Energy Transition 9:00 - 17:00 (8h) [COST CA19108] Possible Meetings - High-Temperature SuperConductivity for AcceLerating the Energy Transition Possible Meetings

Online user: 1